LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2007 >> Rondo Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Gasoline Engine Control System (G4KC - GSL 2.4L) >> Engine Control System Components >> Accelerator Position Sensor (APS) >> Inspection >> Component Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection

  1. Connect a scan tool to the Diagnosis Link Connector (DLC).
  2. Start engine and check output voltages of APS 1 and 2 at C.T and W.O.T.

    Specification: Refer to SPECIFICATION .

  3. Turn ignition switch OFF and disconnect the scan tool from the DLC.
  4. Disconnect APS connector and measure resistance between APS terminals 1 and 6 (APS 1).

    Specification: Refer to SPECIFICATION .

  5. Disconnect APS connector and measure resistance between APS terminals 4 and 5 (APS 2).

    Specification: Refer to SPECIFICATION .

scientia non olet · About LEMON Manuals