Shift Lever: Reassembly

Grease the tube (B) and install the lever (A) by tightening the bolt (C).
TORQUE:

8-12 N.m (80-120 kgf.cm, 5.8-8.7 lb-ft)

Fig 1: Identifying Lever, Tube And Bolt
Courtesy of KIA MOTORS AMERICA, INC.
Install the lever assembly (B) by tightening the bolt (A).
TORQUE:

8-12 N.m (80-120 kgf.cm, 5.8-8.7 lb-ft)

Fig 2: Identifying Lever Assembly And Mounting Bolt
Courtesy of KIA MOTORS AMERICA, INC.
Install the solenoid (B) and solenoid lever (A).

Fig 3: Identifying Solenoid And Solenoid Lever
Courtesy of KIA MOTORS AMERICA, INC.
Install the switch assembly (A) and "P" position switch assembly.
TORQUE:

1.3-1.9 N.m (13-19 kgf.cm, 0.95-1.38 lb-ft)

Fig 4: Identifying Switch Assembly
Courtesy of KIA MOTORS AMERICA, INC.
Connect the solenoid connector (A) and install the indicator panel (B).

Fig 5: Identifying Solenoid Connector And Indicator Panel
Courtesy of KIA MOTORS AMERICA, INC.
Install the shift lever knob (A) by tightening the two screws.
TORQUE:

2-3 N.m (20-30 kgf.cm, 1.45-2.18 lb-ft)

Fig 6: Identifying Shift Lever Knob And Screws
Courtesy of KIA MOTORS AMERICA, INC.
Install both sides of the brackets.
TORQUE:

16-23 N.m (160-230 kgf.cm, 11.6-16.7 lb-ft)
Install the adjusting pedal relay (A) to the bracket.

Fig 7: Identifying Adjusting Pedal Relay
Courtesy of KIA MOTORS AMERICA, INC.