Engine Control System
TIGHTENING TORQUES SPECIFICATION
| Item | Kgf.m | N.m | lbf.ft |
|---|---|---|---|
| ECM installation bolts | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
| Engine coolant temperature sensor installation | 2.0 ~ 4.0 | 19.6 ~ 39.2 | 14.5 ~ 28.9 |
| Throttle position sensor installation screws | 0.15 ~ 0.25 | 1.5 ~ 2.5 | 1.1 ~ 1.8 |
| Crankshaft position sensor installation bolt | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
| Camshaft position sensor installation bolt | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
| Knock sensor installation bolt | 1.7 ~ 2.7 | 16.7 ~ 26.5 | 12.3 ~ 19.5 |
| Heated oxygen sensor (Bank 1/Sensor 1) installation | 3.5 ~ 4.5 | 34.3 ~ 44.1 | 25.3 ~ 32.5 |
| Heated oxygen sensor (Bank 1/Sensor 2) installation | 5.0 ~ 6.0 | 49.1 ~ 58.9 | 36.2 ~ 43.4 |
| CVVT Oil temperature sensor installation | 0.2 ~ 0.4 | 2.0 ~ 3.9 | 1.4 ~ 2.9 |
| Idle speed control actuator installation screws | 0.8 ~ 1.2 | 7.8 ~ 11.8 | 5.8 ~ 8.7 |
| CVVT Oil control valve installation bolt | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
| Ignition coil assembly installation bolts/nuts | 1.9 ~ 2.7 | 18.6 ~ 26.5 | 13.7 ~ 19.5 |
| Throttle body installation nuts | 1.9 ~ 2.4 | 18.6 ~ 26.5 | 13.7 ~ 17.4 |