Front Side Impact Sensor
CAUTION:
- Removal of the airbag must be performed according to the precautions/procedures.
- Before disconnecting the side impact sensor connector(s), disconnect the side airbag connector(s).
- Do not turn the ignition switch ON and do not connect the battery cable while replacing the side impact sensor.
- Disconnect the battery negative cable, and wait for at least 3 minutes before beginning work.
- Remove the door scuff trim. Refer to FRONT DOOR AND REAR DOOR SCUFF TRIM REPLACEMENT .
- Remove the center pillar trim. Refer to CENTER LOWER AND UPPER PILLAR TRIM REPLACEMENT .
- Disconnect the Side Impact Sensor connector and remove the Side Impact Sensor mounting bolt.