Component Inspection

Check Transponder
1. Ignition "ON" & Engine "OFF".
2. Perform neutral mode, key teaching and password teaching/changing.
  NOTE: Be sure that PIN code is prepared before performing neutral mode.
3. Is the neutral, teaching and password teaching/changing mode possible?
  YES
  
  Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.
  
  NO
  
  Substitute with a known-good virgin Transponder and monitor CURRENT DATA.
  
  If the key status is displayed as "Virgin", replace Transponder.
  
  Perform key teaching mode in "Reference Data" Go to "VERIFICATION OF VEHICLE REPAIR " procedure.