Engine Control System
TIGHTENING TORQUES SPECIFICATION
| Item | Kgf.m | N.m | lbs. ft |
|---|---|---|---|
| ECM installation bolts | 1.0-1.2 | 9.8-11.8 | 7.2-8.7 |
| Engine coolant temperature sensor installation | 2.0-4.0 | 19.6-39.2 | 14.5-28.9 |
| Throttle position sensor installation screws | 0.15-0.25 | 1.5-2.5 | 1.1-1.8 |
| Crankshaft position sensor installation bolt | 1.0-1.2 | 9.8-11.8 | 7.2-8.7 |
| Camshaft position sensor installation bolt | 1.0-1.2 | 9.8-11.8 | 7.2-8.7 |
| Knock sensor installation bolt | 1.7-2.7 | 16.7-26.5 | 12.3-19.5 |
| Heated oxygen sensor (Bank 1/Sensor 1) installation | 3.5-4.5 | 34.3-44.1 | 25.3-32.5 |
| Heated oxygen sensor (Bank 1/Sensor 2) installation | 5.0-6.0 | 49.1-58.9 | 36.2-43.4 |
| CVVT Oil temperature sensor installation | 0.2-0.4 | 2.0-3.9 | 1.4-2.9 |
| Idle speed control actuator installation screws | 0.8-1.2 | 7.8-11.8 | 5.8-8.7 |
| CVVT Oil control valve installation bolt | 1.0-1.2 | 9.8-11.8 | 7.2-8.7 |
| Ignition coil assembly installation bolts/nuts | 1.9-2.7 | 18.6-26.5 | 13.7-19.5 |
| Throttle body installation nuts | 1.9-2.4 | 18.6-26.5 | 13.7-17.4 |