LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2009 >> Amanti >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Control System >> Inhibiter Switch >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inhibiter Switch: Installation

  1. Set the inhibitor switch to the "N" position.
  2. Set the inhibitor switch control shaft to the "N" position.
  3. Install the inhibitor switch and manual control lever.

    TORQUE:

    Shaft nut: 18-25 N.m (1.8-2.5 kgf.m, 13.0-18.1 lb-ft)

    Bolt (2EA): 10-12 N.m (1.0-1.2 kgf.m, 7-8 lb-ft)

  4. Install the control cable to the manual control lever.
  5. Connect the inhibitor switch connector.
  6. Installation is the reverse of the removal.
  7. Turn the ignition switch ON after installation.

    Move the shift lever from "P" range to "L" range, and verify that the A/T gear position indicator follows the transaxle range switch.

scientia non olet · About LEMON Manuals