Output Speed Sensor: Description
| Sensor type |
- Type: HALL SENSOR
- Output voltage: DC 12V
- Current consumption: 22mA (Max)
|
| Function |
- Output shaft speed sensor: Detect the output shaft RPM (T/F DRIVE GEAR RPM) at the T/F drive gear
- Feedback control, clutch-clutch control, damper clutch control, shift range control, incorrect ratio control and sensor trouble detection signal.
|
| Connector |
 Courtesy of KIA MOTORS AMERICA, INC.
|
Courtesy of KIA MOTORS AMERICA, INC. OUTPUT SPEED SENSOR REFERENCE
| Item |
Inspection item |
Standard value |
| Air gap |
Output shaft speed sensor |
0.0335in (0.85mm) |
| Sensor resistance |
Output shaft speed sensor |
Over 1 MΩ |
| Output voltage |
HIGH |
Over 4.8V |
| LOW |
Below 0.8V |