Standard Hydraulic Pressure Test
STANDARD HYDRAULIC PRESSURE TEST
| No. | Measurement Condition | Standard hydraulic pressure kPa (kg/cm2 , psi) | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Select lever position | Engine speed ( RPM) | Shift position | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |
| Reduction pressure | Servo apply pressure | Rear clutch pressure | Front clutch pressure | End clutch pressure | Low & reverse brake pressure | Torque converter pressure | Damper clutch pressure | ||||
| 1 | N | Idling | Neutral | 402-422 (4.1-4.3, 58-61) | - | - | - | - | - | - | - |
| 2 | D (switch ON) | 2,500 | 4th gear | 402-422 (4.1-4.3, 58-61) | 853-893 (8.7-9.1, 124-129) | - | - | 834-873 (8.5-8.9, 121-127) | - | - | 628-687 (6.4-7.0, 91-96) D/CON |
| 3 | D | 2,500 | 3rd gear | 402-422 (4.1-4.3, 58-61) | 844-883 (8.6-9.0, 122-128) | 844-883 (8.6-9.0, 122-128) | 824-863 (8.4-8.8, 119-125) | 844-883 (8.6-9.1, 122-128) | - | - | 628-687 (6.4-7.0, 91-96) D/CON |
| 4 | D | 2,500 | 2nd gear | 402-422 (4.1-4.3, 58-61) | 853-893 (8.7-9.1, 124-129) | 844-883 (8.6-9.0, 122-128) | - | - | - | - | 628-687 (6.4-7.0, 91-96) D/C ON |
| 5 | L | 1,000 | 1st gear | 402-422 (4.1-4.3, 58-61) | - | 844-883 (8.6-9.0, 122-128) | - | - | 343-520 (3.5-5.3, 50-75) | 422-480 (4.3-4.9, 61-70) | 235-275 (2.4-2.8, 34-40) D/C OFF |
| 6 | R | 2,500 | Reverse | 441-461 (4.5-4.7, 64-67) | - | - | 1815-1913 (18.5-19.5, 263-277) | - | 1815-1913 (18.5-19.5, 263-277) | 432-490 (4.4-5.0, 63-71) | 265-343 (2.7-3.5, 38-50) D/C OFF |
NOTE:
- "-" is 0.2 (0.3)kg/cm2 or less and " ( )" is the reverse.
- SW-ON: Turn the overdrive control switch ON.
- SW-OFF: Turn the overdrive control switch OFF.
- The hydraulic pressure may be more than standard value at the ambient temperature.