Pulse Generator: Description
The pulse generator "A" detects the speed of the end clutch retainer. The speed signal is used for damper clutch control, hydraulic pressure control and incorrect gear detection by PCM.
The pulse generator "B" detects the speed of the transfer driven gear. The speed signal is used for shift timing, hydraulic pressure control and incorrect gear detection by PCM.
PULSE GENERATOR STANDARD VALUE SPECIFICATIONS
| Pulse generator A, B | Inspection item | Standard value |
|---|---|---|
| Sensor resistance | A: 1 terminal-2 terminal | 215-275 Ω |
| B: 1 terminal-2 terminal | 215-275 Ω | |
| Output voltage (A, B) | 1 terminal-ground | 2.5 V± 1.2 V |
| 2 terminal-ground | 2.5 V |