LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2010 >> Forte EX, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Accelerator Position Sensor (APS) >> Repair procedures >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Inspection

  1. Connect the Scan Tool on the Data Link Connector (DLC).
  2. Turn the ignition switch ON.
  3. Measure the output voltage of the APS 1 and 2 at C.T and W.O.T.

    Specification:  Refer to "SPECIFICATION "

  4. Turn the ignition switch OFF and disconnect the Scan Tool from the DLC.
  5. Disconnect the APS Connector.
  6. Measure the resistance between the APS terminals 5 and 4 (APS 1).

    Specification:  Refer to "SPECIFICATION "

  7. Measure the resistance between the APS terminals 6 and 2 (APS 2).

    Specification:  Refer to "SPECIFICATION "

scientia non olet · About LEMON Manuals