LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2010 >> Forte EX, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> ETC (Electronic Throttle Control) System >> Repair procedures >> Inspection >> Throttle Position Sensor (TPS)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Throttle Position Sensor (TPS)

  1. Connect the Scan Tool on the Data Link Connector (DLC).
  2. Start the engine and measure the output voltage of TPS 1 and 2 at C.T. and W.O.T.
    THROTTLE ANGLE AND OUTPUT VOLTAGE SPECIFICATION

    Throttle Angle Output Voltage (V)
    TPS 1 TPS 2
    C.T 0.3 ~ 0.9 4.2 ~ 5.0
    W.O.T 1.5 ~ 3.0 3.3 ~ 3.8
  3. Turn the ignition switch OFF and disconnect the Scan Tool from the DLC.
  4. Disconnect the ETC module connector and measure the resistance between the ETC module terminals 1 and 2.

    Specification:  Refer to "SPECIFICATION "

scientia non olet · About LEMON Manuals