TCM Terminal Input/Output Signal
TRANSAXLE CONTROL MODULE TERMINAL INPUT/OUTPUT CHART
| Pin No. | Signal Description | Condition | Input, Output Value | Test Result | |
|---|---|---|---|---|---|
| Type | Level | ||||
| A3 | Variable Force Solenoid (Linear Solenoid) | Output/PWM | signal: 3.0 < Iscb < 5.0A supply: V_VFS | ||
| A4 | Solenoid valve OD | Output/PWM | signal: 3.0 < Iscb < 5.0A supply: V_SOL | ||
| A5 | Solenoid valve LR | Output/PWM | signal: 3.0 < Iscb < 5.0A supply: V_SOL | ||
| A6 | Over Drive Lamp | Reserved (Not Used) | |||
| A7 | Spare Input | Reserved (Not Used) | |||
| A8 | Cruise control lamp signal | Lamp ON | Input/static signal | Vlow < 1.8V Vhigh > 4.2V |
12.37 V (Vbatt Level) |
| Lamp OFF | 0.2 V | ||||
| A9 | Inhibitor switch D | D ON | Input/static signal | Vlow < 1.8V Vhigh > 4.2V Active : high |
12.37 V (Vbatt Level) |
| Others | 0.2 V | ||||
| A10 | Inhibitor switch 3 or Sports mode select switch | 3 ON | Input/static signal | Vlow < 1.8V Vhigh > 4.2V Active : high |
12.37 V (Vbatt Level) |
| Others | 0.2 V | ||||
| A11 | Inhibitor switch 2 or Sports Up switch | 2 ON | Input/static signal | Vlow < 1.8V Vhigh > 4.2V Active : high |
12.37 V (Vbatt Level) |
| Others | 0.2 V | ||||
| A12 | Inhibitor switch L or Sports Down switch | L ON | Input/static signal | Vlow < 1.8V Vhigh > 4.2V Active : high |
12.37 V (Vbatt Level) |
| Others | 0.2 V | ||||
| A17 | Solenoid valve DCC | Output/PWM | signal: 8.0 < Iscb < 11.0A supply: V_SOL | ||
| A18 | Power supply for VFS | ON | Power | 12.4V (Vbatt Level) | |
| OFF | 0.3V | ||||
| A20 | TCU ground | Ground | -0.3V ~ +0.5V | ||
| A21 | Spare output | Reserved (Not Used) | |||
| A22 | OD Off Request from Auto-Cruise | Reserved (Not Used) | |||
| A23 | Hold switch input | Hold ON | Input/static signal | Vlow < 1.8V Vhigh > 4.2V |
12.37 V (Vbatt Level) |
| Hold OFF | 0.2 V | ||||
| A24 | Inhibitor switch N | N ON | Input/static signal | Vlow < 1.8V Vhigh > 4.2V Active : high |
12.37 V (Vbatt Level) |
| Others | 0.2 V | ||||
| A25 | Inhibitor switch R | R ON | Input/static signal | Vlow < 1.8V Vhigh > 4.2V Active : high |
12.37 V (Vbatt Level) |
| Others | 0.2 V | ||||
| A26 | Inhibitor switch P | P ON | Input/static signal | Vlow < 1.8V Vhigh > 4.2V Active : high |
12.37 V (Vbatt Level) |
| Others | 0.2 V | ||||
| A27 | Spare input | Reserved (Not Used) | |||
| A32 | Solenoid valve 2ND | Output/PWM | signal: 3.0 < Iscb < 5.0A supply: V_SOL | ||
| A33 | Solenoid valve UD | Output/PWM | signal: 3.0 < Iscb < 5.0A supply: V_SOL | ||
| A34 | TCU ground | Ground | -0.3V ~ +0.5V | ||
| A35 | TCU ground | Ground | -0.3V ~ +0.5V | ||
| A36 | Gear Info to Trip computer | Output/PWM | 50 Hz | ||
| A37 | Auto-Cruise Release Request | ON | Output/static signal | 12.37 V (Vbatt Level) | |
| OFF | 0.2 V | ||||
| A38 | Input speed PG-A | No signal: 2068rpm | pulse | Vlow < 1.8V Vhigh > 4.2V |
|
| A39 | Output speed PG_B sensor ground | Ground | -0.3V ~ +0.5V | ||
| A40 | A/T Fluid temp sensor (Oil Temp sensor) | analog | V = -0.3~VB | ||
| A47 | Power supply for Solenoid valves 1 | ON | Power | 12.4V (Vbatt Level) | |
| OFF | 0.3V | ||||
| A48 | Power supply for Solenoid valves 2 | ON | Power | 12.4V (Vbatt Level) | |
| OFF | 0.3V | ||||
| A49 | Battery voltage supply for V_SOL1/2 | IGK_ON | Power | 12.4V (Vbatt Level) | |
| IGK_OFF | 0.3V | ||||
| A50 | Battery voltage supply for V_SOL1/2 | IGK_ON | Power | 12.4V (Vbatt Level) | |
| IGK_OFF | 0.3V | ||||
| A51 | Vehicle speed output to Cluster | pulse | 1.0 < Icl < 2.0A | ||
| A52 | Break pedal switch | Brake ON | sens | Vlow < 1.0V Vhigh > 6V |
12.37 V (Vbatt Level) |
| Brake OFF | 0.2 V | ||||
| A53 | Input speed PG_A sensor ground | Ground | -0.3V ~ +0.5V | ||
| A54 | Output speed PG-B | No signal: 2068rpm | pulse | Vlow < 1.8V Vhigh > 4.2V |
|
| A55 | ATF sensor ground (Oil Temp sensor ground) | Ground | -0.3V ~ +0.5V | ||
| A56 | Spare input | Reserved (Not Used) | |||