LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2010 >> Sedona Base >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Supplemental Restraints System Control Module (SRSCM) >> SRS Control Module (SRCM) >> Repair procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Removal

  1. Disconnect the negative (-) cable from battery and wait for at least three minutes.
  2. Remove ignition key from the vehicle.
  3. Disconnect the DAB, PAB, SAB, CAB and BPT connectors.
  4. Remove the floor console and heater ducts. (Refer to INTERIOR )
  5. Press the lock (1), then pull back the connector lever (2) until it clicks.
    Fig 1: Pulling Connector Lever
    G06838304Courtesy of KIA MOTORS AMERICA, INC.
  6. Disconnect the SRSCM harness connector (A) and (B) from the SRSCM.
  7. Remove the SRSCM mounting bolt (A) and nuts (B) from the SRSCM, then remove the SRSCM.
    Fig 2: Identifying SRSCM Mounting Bolt
    G06838305Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals