April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

CAUTION:

DON'T remove the camshaft position sensor while the engine is running or right after engine is turned off. The part and engine oil is hot and can cause burns.

Bank 1/Intake

Turn the ignition switch OFF and disconnect the battery negative (-) cable.
Disconnect the camshaft position sensor connector (A).
Remove the installation bolt (B), and then remove the sensor.

Fig 1: Camshaft Position Sensor Connector & Installation Bolt
Courtesy of KIA MOTORS AMERICA, INC.

Bank 1/Exhaust
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2. Remove the heater protect cover. Refer to EXHAUST MANIFOLD .
3. Disconnect the camshaft position sensor connector (A).
4. Remove the hanger and the protector.
5. Remove the installation bolt, and then remove the sensor.
Fig 2: Camshaft Position Sensor Connector
Courtesy of KIA MOTORS AMERICA, INC.