Repair Procedures: Removal

Turn the ignition switch OFF and disconnect the battery negative (-) cable.
Disconnect the EWGA connector (A).

Fig 1: EWGA Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the shaft link assembly (B) after removing the C-ring (A).

Fig 2: Shaft Link Assembly & C-Ring
Courtesy of KIA MOTORS AMERICA, INC.
Remove the EWGA after removing the bolts (A).

Fig 3: EWGA Bolts
Courtesy of KIA MOTORS AMERICA, INC.

CAUTION: When carrying the turbo charger, do not hold the rod of the turbo charge to prevent bending the rod.