On-Vehicle Inspection: Replacement

IGNITION COIL 

1. Remove the engine cover.
2. Remove the ignition coil with bolt.

   Tightening torque :

   7.8 ~ 9.8N.m (0.8 ~ 1.0kgf.m, 5.8 ~ 7.2lb-ft)

   Fig 1: Identifying Ignition Coil

   Courtesy of KIA MOTORS AMERICA, INC.
   NOTE: When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).
   Fig 2: Pulling Ignition Coil Connector Lock Pin

   Courtesy of KIA MOTORS AMERICA, INC.
3. Installation is the reverse of removal.