Repair procedures (A4AF3): Disassembly

WARNING: This page is about a different variant/trim than selected.

Remove the push button (A) from the knob sub assembly.

Fig 1: Identifying Push Button
Courtesy of KIA MOTORS AMERICA, INC.
Remove the knob sub assembly from the lever sub assembly. (Screw:1EA)

Fig 2: Identifying Lever Sub Assembly Screw
Courtesy of KIA MOTORS AMERICA, INC.
Remove the indicator assembly (A).

Fig 3: Identifying Indicator Assembly
Courtesy of KIA MOTORS AMERICA, INC.
Remove the detent spring (A). (Bolt:1EA)

Fig 4: Identifying Detent Spring
Courtesy of KIA MOTORS AMERICA, INC.
Loosen the bracket sub assembly nut (A).

Fig 5: Identifying Bracket Sub Assembly Nut
Courtesy of KIA MOTORS AMERICA, INC.
Remove the screw.

Fig 6: Identifying Bracket Sub Assembly Screw
Courtesy of KIA MOTORS AMERICA, INC.
Disassemble the bracket sub assembly (A) after removing the cotter pin (2EA).

Fig 7: Identifying Bracket Sub Assembly
Courtesy of KIA MOTORS AMERICA, INC.
Disassemble the hinge shaft from the lever sub assembly.

Fig 8: Identifying Hinge Shaft And Lever Sub Assembly
Courtesy of KIA MOTORS AMERICA, INC.