Front Wheel Alignment: Caster

Fig 1: Identifying Caster

Courtesy of KIA MOTORS AMERICA, INC.

NOTE:

Compensate the steering angle sensor after adjusting the wheel alignment. (Refer to CHECKING STEERING ANGLE Steering System - "Steering Column-Shaft")
The worn loose or damaged parts of the front suspension assembly must be replaced prior to measuring front wheel alignment.
Camber and caster are pre-set to the specified value at the factory and don't need to be adjusted.
If the camber and caster are not within specifications, replace bent or damaged parts.
The difference of left and right wheels about the camber and the caster must be within the range of 0° ± 0.5°.