Repair Procedures: Removal

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2. Disconnect the connector (A), and then remove the sensor (B).

(Bank 1/Sensor 1) 

Fig 1: Identifying O2 Sensor Connector

Courtesy of KIA MOTORS AMERICA, INC.

Fig 2: Identifying O2 Sensor

Courtesy of KIA MOTORS AMERICA, INC.

(Bank 1/Sensor 2) 

Fig 3: Identifying O2 Sensor 2 Connector

Courtesy of KIA MOTORS AMERICA, INC.

Fig 4: Identifying O2 Sensor 2

Courtesy of KIA MOTORS AMERICA, INC.

(Bank 2/Sensor 1) 

Fig 5: Identifying O2 Sensor 1 Connector

Courtesy of KIA MOTORS AMERICA, INC.

Fig 6: Identifying O2 Sensor 1

Courtesy of KIA MOTORS AMERICA, INC.

(Bank 2/Sensor 2) 

Fig 7: Identifying O2 Sensor 2 Connector

Courtesy of KIA MOTORS AMERICA, INC.

Fig 8: Identifying O2 Sensor 2

Courtesy of KIA MOTORS AMERICA, INC.