LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2011 >> Sedona EX >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Variable Intake Solenoid (VIS) Valve >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the variable intake solenoid valve connector (A).
  3. Disconnect the vacuum hoses from the valve.
  4. Remove the installation nut (B), and then remove the valve from the surge tank.
Fig 1: Variable Intake Solenoid Valve & Connector
G07395703Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals