Repair procedures: Removal

CAUTION:

In the case of a vehicle equipped with an immobilizer, perform the "Key Teaching" procedure (Refer to TEACHING PROCEDURES )

Turn ignition switch OFF and disconnect the negative (-) battery cable.
Disconnect the ECM connector (A).

Fig 1: Identifying ECM Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the bracket installation bolts (A) and the nut (B).

Fig 2: Identifying Bracket Installation Bolts & Nut
Courtesy of KIA MOTORS AMERICA, INC.
Remove the installation bolts (A), and then remove the ECM from the bracket.

Fig 3: Identifying ECM Mounting Bolts

Courtesy of KIA MOTORS AMERICA, INC.