Repair Procedures: Installation
- Installation is the reverse of removal.CAUTION: After replacement or reinstallation procedure of the valve body assembly, must perform procedures below.NOTE:
- Continue to apply liquid gasket at application points at the valve body cover with Ø2.5 mm (0.0984 in.) thickness.
Liquid gasket Part name :
Threebond 1281B or LOCTITE FMD-546 or equivalent
- Adding automatic transaxle fluid. Refer to Oil level Check .
- Perform TCM learning after replacing the valve body to prevent slow transaxle response, jerky acceleration and jerky startup. Refer to TCM LEARNING .
- Continue to apply liquid gasket at application points at the valve body cover with Ø2.5 mm (0.0984 in.) thickness.