Repair Procedures

Replacement

1. Disconnect the negative (-) battery terminal.
2. Using the screwdriver, remove the side cover (A).




3. Loosen the mounting screw and then remove the crash pad lower cover (A).




4. Disconnect the connector (A), and then remove the crash pad lower cover.




5. Using the screwdriver, remove the center garnish (A).




6. Loosen the mounting screw and then remove the blower & A/C controller (A).




7. Disconnect the center connectors and then remove the blower & A/C controller (A).




8. Loosen the mounting and then remove the center fascia box (A).




9. Loosen the mounting screws and then remove the blower & A/C controller (A).




10. Installation is the reverse order of removal.