Repair Procedures: Removal: Notes

Shift Lever Assembly Replacement 

1. Remove the center console assembly. Refer to INTERIOR (CONSOLE) .
2. Disconnect sports mode connector (A).
   Fig 1: Sports Mode Connector

   Courtesy of KIA MOTORS AMERICA, INC.
3. Remove the shift cable (B).
   Fig 2: Shift Cable

   Courtesy of KIA MOTORS AMERICA, INC.
4. Remove the shift lever assembly (B) by removing the bolts (A-4ea).

   Tightening torque: 

   9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.9 lb-ft)

   Fig 3: Shift Lever Assembly & Bolts

   Courtesy of KIA MOTORS AMERICA, INC.
5. Installation is the reverse of removal.
   NOTE: Make sure vehicle does not roll before setting room side shift lever and T/M side manual control lever to "N" position.