Repair Procedures: Removal

NOTE: In the case of the vehicle equipped with immobilizer or button engine start system, perform "Key Teaching" procedure together. Refer to TEACHING PROCEDURES .

Turn ignition switch OFF and disconnect the negative (-) battery cable.
Disconnect the ECM connector (A).

Fig 1: ECM Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the air cleaner assembly. Refer to INTAKE AND EXHAUST SYSTEM .
After removing the installation bolts (A) and nut (B), remove the ECM (C).

Fig 2: ECM, Mounting Bolts & Nut

Courtesy of KIA MOTORS AMERICA, INC.