Repair Procedures: Replacement

NOTE: In the case of the vehicle equipped with immobilizer or button engine start system, perform "Key Teaching" procedure. Refer to TEACHING PROCEDURES .

Turn ignition switch OFF and disconnect the negative (-) battery cable.
Disconnect the TCM Connector (A).

Fig 1: Identifying TCM Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the air cleaner assembly. Refer to INTAKE AND EXHAUST SYSTEM .
After removing the installation bolts (A) and nut (B), remove the TCM (C).
TCM installation bolt/nut:

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Fig 2: TCM, Bolts & Nut
Courtesy of KIA MOTORS AMERICA, INC.
Installation is reverse of removal.