Lower Panel Replacement

After loosening the crash pad lower panel mounting screws, remove the lower panel (A).

Fig 1: Identifying Crash Pad Lower Panel And Mounting Screws
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the speaker lamp switch connector (A) and start/stop button connector (B).

Fig 2: Identifying Speaker Lamp Switch Connector And Start/Stop Button Connector
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the connector (A).

Fig 3: Disconnecting Connector
Courtesy of KIA MOTORS AMERICA, INC.
After loosening the mounting bolts, then remove the reinforcing panel (A).

Fig 4: Identifying Reinforcing Panel And Mounting Bolts
Courtesy of KIA MOTORS AMERICA, INC.
Installation is the reverse of removal.
NOTE:
- Make sure the connector is plugged in properly.
- Replace any damaged clips.