LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2012 >> Soul ! >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> Injector >> Repair procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Release the residual pressure in fuel line (Refer to the "RELEASE RESIDUAL PRESSURE IN FUEL LINE ").
    CAUTION: When removing the fuel pump relay, a Diagnostic Trouble Code (DTC) may occur. Delete the code with the GDS after completion of "Release Residual Pressure in Fuel Line" work.
  3. Disconnect the injector connector (A).
  4. Disconnect the fuel feed tube quick-connector (B).
  5. Remove the installation bolt (C), and then remove the delivery pipe & injector assembly from the engine.
    Fig 1: Identifying Injector Connector, Fuel Feed Tube Quick-Connector And Bolt
    G08331079Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the fixing clip (A), and then separate the injector from the delivery pipe.
    Fig 2: Identifying Injector Fixing Clip
    G08331080Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals