Toe Adjustment

Loosen the tie rod end lock nut.
Remove the bellows clip to prevent the bellows from being twisted.
Adjust the toe by screwing or unscrewing the tie rod. Toe adjustment should be made by turning the right and left tie rods by the same amount.
Toe

Total: -0.2°~0.2°

Individual: -0.1°~0.1°

Fig 1: Toe Adjustment
Courtesy of KIA MOTORS AMERICA, INC.
When completing the toe adjustment, install the bellows clip and tighten the tie rod end lock nut to specified torque.
Tightening torque:

49.0 ~ 53.9N.m (5.0 ~ 5.5kgf.m, 36.2 ~ 39.8lb-ft)
Compensate the steering angle sensor after adjusting the wheel alignment.
(Refer to "EPS CONTROL UNIT ")