Repair procedures: Replacement

Remove the floor console assembly.
(Refer to "CONSOLE ".)
Loosen the mounting nut (A) and then remove the shift lock cable from the shift lock cam (B).
Tightening torque:

9.8 ~ 13.7 N.m (1.0 ~ 1.4 kgf.m, 7.2 ~ 10.1 lb-ft)

Fig 1: Identifying Shift Lock Cam And Mounting Nut
Courtesy of KIA MOTORS AMERICA, INC.
Remove the snap pin (B) and shift lock cable (C) from the brake pedal assembly (A).

Fig 2: Identifying Brake Pedal Assembly, Shift Lock Cable And Snap Pin
Courtesy of KIA MOTORS AMERICA, INC.
Installation is the reverse of removal.
NOTE: Adjust the shift lock cable after installing.
(Refer to "SHIFT LOCK CABLE (ADJUST) " in this group)