LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2012 >> Soul ! >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System - 2.0L >> Description and Operation >> Control System Composition >> Inspection Procedure (Using the GDS)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure (Using the GDS)

  1. Turn OFF the ignition switch.
  2. Connect the GDS to the data link connector on the lower crash pad.
  3. Turn ON the ignition switch.
  4. Use the GDS to check the diagnostic trouble code.
  5. Repair the faulty part from the diagnosis chart.
  6. Erase the diagnostic trouble code.
  7. Disconnect the GDS.
    CAUTION:
    • Perform TCM learning after replacing the automatic transaxle to prevent slow automatic transaxle response, jerky acceleration and jerky startup. (Refer to "Automatic transaxle control system (REPAIR PROCEDURES )" in this group)
    • Adding automatic transaxle fluid. (Refer to SERVICE ADJUSTMENT PROCEDURE .
    • After servicing the automatic transaxle or TCM, clear the diagnostic trouble code (DTC) using the GDS tool. Diagnostic trouble codes (DTC) cannot be cleared by disconnecting the battery.
scientia non olet · About LEMON Manuals