Floor Console Replacement

NOTE:

When prying with a flat-up screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.

Using a screwdriver or remover, disconnect the gear boots (A).

Fig 1: Disconnecting Gear Boots Using Screwdriver
Courtesy of KIA MOTORS AMERICA, INC.
Using a screwdriver or remover, remove the console upper cover (A).

Fig 2: Identifying Console Upper Cover
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the connectors (A).

Fig 3: Identifying Connector
Courtesy of KIA MOTORS AMERICA, INC.

Fig 4: Identifying Connectors
Courtesy of KIA MOTORS AMERICA, INC.
Remove the parking brake cover (A).

Fig 5: Identifying Parking Brake Cover
Courtesy of KIA MOTORS AMERICA, INC.
Remove the console side cover (A).

Fig 6: Identifying Console Side Cover
Courtesy of KIA MOTORS AMERICA, INC.
Remove the console tray mat (A).

Fig 7: Identifying Console Tray Mat
Courtesy of KIA MOTORS AMERICA, INC.
After loosening the console mounting screws and bolts, remove the floor console assembly (A).

Fig 8: Identifying Floor Console Assembly Mounting Screws And Bolts
Courtesy of KIA MOTORS AMERICA, INC.
Installation is the reverse of removal.
NOTE:
- Make sure the connector is plugged in properly.
- Replace any damage clips.