LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2013 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 1.6L >> Camshaft Position Sensor (CMPS) >> Repair procedures >> Removal >> (Bank 1 / Intake)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

(Bank 1 / Intake)

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the camshaft position sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor.
    Fig 1: Camshaft Position Sensor Component Location (Bank 1 / Intake)
    G08327965Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals