LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2014 >> Sedona EX >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Variable Charge Motion Actuator (VCMA) >> Repair Procedures >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Installation

NOTE:
  • Install the component with the specified torques.
  • Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
NOTE: The VCM actuator has to be installed at the fully closing position of the VCM valve.

If it doesn't, the VCM coupling of the VCM shaft can't be put in the VCM actuator.

  1. Installation is reverse of removal.

    2. Variable Charge Motion Actuator installation bolt: 

    8.0 ~ 11.0 N.m (0.8 ~ 1.1 kgf.m, 5.9 ~ 8.1 lb-ft)

scientia non olet · About LEMON Manuals