LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2014 >> Soul Base, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 1.6L >> Rail Pressure Sensor (RPS) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Release the residual pressure in fuel line (Refer to the RELEASE RESIDUAL PRESSURE IN FUEL LINE ).
  3. Remove the Alternator.

    (Refer to ALTERNATOR )

  4. Disconnect the rail pressure sensor connector (A), and then remove the sensor (B) from the delivery pipe.
    Fig 1: Identifying Rail Pressure Sensor Connector And Sensor
    G09773001Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals