LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2015 >> Forte LX, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 1.8L >> Camshaft Position Sensor (CMPS) >> Repair Procedures >> Removal >> [Bank 1/Intake]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

[Bank 1/Intake]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the camshaft position sensor connector (B) after removing the clip (A).
  3. Remove the installation bolt (C), and then remove the sensor.
    Fig 1: Camshaft Position Sensor Connector, Bolt & Clip (Bank 1/Intake)
    G09748754Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals