Repair Procedures: Removal

[Bank 1/Intake] 

1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
2. Remove the intake manifold.

   (Refer to Engine Mechanical System - "INTAKE MANIFOLD ")

3. Disconnect the CVVT oil control valve connector (A).
4. Remove the installation bolt (B), and then remove the valve from the engine.

Fig 1: CVVT Oil Control Valve Connector And Bolt

Courtesy of KIA MOTORS AMERICA, INC.

[Bank 1/Exhaust)] 

1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
2. Disconnect the CVVT oil control valve connector (A).
   Fig 2: CVVT Oil Control Valve Connector

   Courtesy of KIA MOTORS AMERICA, INC.
3. Remove the cylinder head cover.

   (Refer to Engine Mechanical System - "CYLINDER HEAD COVER ")

4. Remove the mounting bolt (A), and then remove the valve from the engine.

Fig 3: Engine Valve Mounting Bolts

Courtesy of KIA MOTORS AMERICA, INC.

[Bank 2/Intake] 

1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
2. Remove the intake manifold.

   (Refer to Engine Mechanical System - "INTAKE MANIFOLD ")

3. Disconnect the CVVT oil control valve connector (A).
4. Remove the installation bolt (B), and then remove the valve from the engine.

Fig 4: CVVT Oil Control Valve Connector And Bolt

Courtesy of KIA MOTORS AMERICA, INC.

[Bank 2/Exhaust] 

1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
2. Disconnect the CVVT oil control valve connector (A).
   Fig 5: CVVT Oil Control Valve Connector

   Courtesy of KIA MOTORS AMERICA, INC.
3. Remove the cylinder head cover.

   (Refer to Engine Mechanical System - "CYLINDER HEAD COVER ")

4. Remove the mounting bolt (A), and then remove the valve from the engine.

Fig 6: Engine Valve Mounting Bolt

Courtesy of KIA MOTORS AMERICA, INC.