Repair Procedures: Removal

Place the shift lever into the "N" position.
Remove the battery and battery tray.
(Refer to Engine Electrical System - "BATTERY ")
Disconnect the inhibitor switch connector (A) and loosen the shift cable mounting nut (B).

Fig 1: Inhibitor Switch Connector And Shift Cable Mounting Nut
Courtesy of KIA MOTORS AMERICA, INC.
Remove the manual control lever (B) and the washer after removing a nut (A).

Fig 2: Manual Control Lever And Washer
Courtesy of KIA MOTORS AMERICA, INC.
Remove the inhibitor switch (A) after loosening the bolts.

Fig 3: Inhibitor Switch

Courtesy of KIA MOTORS AMERICA, INC.