Key interlock switch
- Remove the key interlock switch (A) after loosening the screw.
- Remove the shift lock solenoid (B) after removing the plastic bracket (A).
- Remove the manual mode switch housing (A) after loosening the screw.
- Remove the main connector (A) from the shift lever.
- Remove the pin fixing bracket (A) from the main connector.
- Remove the pin of key interlock switch from the main connector.
NOTE: Check the wiring color before disconnecting the wiring.
Pin Function Color 1 Shift lock solenoid (+) Black/Yellow 2 Shift lock solenoid (-) White/Black 3 Ground (IG) Black 4 - - 5 Manual mode "up" White 6 Manual mode "select" Red 7 Manual mode "down" Red/Black 8 Key interlock switch (-) Brown 9 Key interlock switch (+) Brown