Repair Procedures: Removal

Move the shift lever to "N" range.
Disconnect the battery negative (-) cable.
Remove the knob (A) and boots (B) by pulling them in the direction of the arrow after separating the boots from the console upper cover.

Fig 1: Pulling Out Console Upper Cover Knob And Boots
Courtesy of KIA MOTORS AMERICA, INC.
Remove the floor console assembly.
(Refer to FLOOR CONSOLE ASSEMBLY Body - "Console")
Disconnect the main connector (A).

Fig 2: Main Connector
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the wiring from the shift lever.

Fig 3: Shift Lever Wiring
Courtesy of KIA MOTORS AMERICA, INC.
Remove the shift cable (A) from the shift lever.

Fig 4: Removing Shift Cable From Shift Lever
Courtesy of KIA MOTORS AMERICA, INC.
Remove the shift lever assembly (A).
Tightening torque:

8.8 ~ 13.7 N.m(0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

Fig 5: Removing Shift Lever Assembly

Courtesy of KIA MOTORS AMERICA, INC.