LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2015 >> Sorento EX, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.3L >> Accelerator Position Sensor (APS) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
  3. Remove the installation bolt (B) and nuts (C), and then remove the accelerator pedal module.
    Fig 1: Accelerator Position Sensor Connector And Nuts
    G09765348Courtesy of KIA MOTORS AMERICA, INC.
    Fig 2: Accelerator Position Sensor Connector And Bolt
    G09765349Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals