Repair Procedures: Installation

Installation is the reverse of removal.
NOTE:
- When installing, apply the ATF oil or white Vaseline to the O-ring (A) not to be damaged.
  
  Fig 1: O-Ring
  Courtesy of KIA MOTORS AMERICA, INC.
- Replace the gasket (A) before reinstalling the valve body cover.
- Adding automatic transaxle fluid.
  (Refer to "FLUID ")
  
  Fig 2: Valve Body Cover Gasket
  Courtesy of KIA MOTORS AMERICA, INC.
- Perform Transaxle Control Module (TCM) learning after replacing the solenoid valve to prevent slow transaxle response, jerky acceleration and jerky startup.
  (Refer to "REPAIR PROCEDURES ")