LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2016 >> Cadenza Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Accelerator Position Sensor (APS) >> Repair procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
    Fig 1: Locating Accelerator Position Sensor Connector
    G11784078Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the installation bolt (B) and nuts (C), and the remove the accelerator pedal module.
Fig 2: Locating Accelerator Pedal Module Installation Bolt
G11784079Courtesy of KIA MOTORS AMERICA, INC.
Fig 3: Locating Accelerator Pedal Module Nuts
G11784080Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals