Repair procedures: Removal

Turn the ignition switch OFF and disconnect the negative (-) battery cable.
Disconnect the accelerator position sensor connector (A).

Fig 1: Locating Accelerator Position Sensor Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the installation nuts (B) and bolt (C), and then remove the accelerator pedal module.

Fig 2: Locating Accelerator Pedal Module Installation Nuts

Courtesy of KIA MOTORS AMERICA, INC.

Fig 3: Locating Accelerator Pedal Module Bolt

Courtesy of KIA MOTORS AMERICA, INC.