LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2016 >> Cadenza Base >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System >> Filler-Neck Assembly >> Repair procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Removal

  1. Open the fuel filler door and then remove the filler-neck installation screw (A).
    Fig 1: Locating Filler-Neck Installation Screw
    G11784187Courtesy of KIA MOTORS AMERICA, INC.
  2. Lift the vehicle.
  3. Remove the rear-LH wheel, tire, and the inner wheel house.
  4. Disconnect the fuel filler hose (A).
  5. Disconnect the ventilation hose (B) from the fuel tank air filter.
    Fig 2: Locating Fuel Filler Hose
    G11784188Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the filler-neck assembly from the vehicle after removing the bracket installation bolt (A).
Fig 3: Locating Filler-Neck Assembly Bracket Installation Bolt
G11784189Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals