LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2016 >> Cadenza Base >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System >> Fuel Pump >> Repair procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Removal

  1. Release the residual pressure in fuel line.

    (Refer to the Fuel Delivery System - Repair Procedures - "RELEASE RESIDUAL PRESSURE IN FUEL LINE ").

  2. Remove the floor mat after open the trunk.
  3. Remove the fuel pump service cover (A) in the trunk.
    Fig 1: Locating Fuel Pump Service Cover In Trunk
    G11784133Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the fuel pump control module & fuel pump extension connector (A).
  5. Disconnect the fuel feed tube quick-connector (B).
  6. Disconnect the fuel tank pressure sensor connector (C).
  7. Disconnect the fuel tank pressure sensor connector (D).
  8. Remove the fuel pump plate cover (E) after removing the bolts.
  9. Remove the fuel pump from the fuel tank.
    Fig 2: Locating Fuel Pump
    G00571076Courtesy of KIA MOTORS AMERICA, INC.
    Fig 3: Identifying Fuel Pump
    G00571080Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals