LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2016 >> Cadenza Base >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System >> Underdrive Brake Control Solenoid Valve (UD/B_VFS) >> Repair procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Removal

NOTE:
  • Maintain clean condition so that foreign substance does not get into the automatic transaxle.
  • Use a coated apron, latex gloves, and stainless tray to prevent foreign substance from getting into the transaxle.
  1. Remove the under cover.

    Tightening torque: 

    7.8 ~ 11.7 N.m (0.8 ~ 1.2 kgf.m, 5.7 ~ 8.6 lb-ft)

    Fig 1: Locating Under Cover
    G11784346Courtesy of KIA MOTORS AMERICA, INC.
  2. Remove the ATF drain plug (A), allow the fluid to drain out and then reinstall the drain plug.

    Tightening torque: 

    33.3 ~ 43.1 N.m (3.4 ~ 4.4 kgf.m, 24.6 ~ 31.8 lb-ft)

    Fig 2: Locating ATF Drain Plug
    G11784347Courtesy of KIA MOTORS AMERICA, INC.
    NOTE:
    • The existing ATF drain plug gasket must be replaced with a new one. (Do not reuse it.)
    • ATF can be reused. Collect it in a clean beaker.
  3. Remove the air cleaner assembly.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  4. Remove the bracket (A) and the air breather hose (B).

    Tightening torque: 

    9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

    Fig 3: Locating Bracket And Air Breather Hose
    G11784348Courtesy of KIA MOTORS AMERICA, INC.
  5. Lift the vehicle after loosening valve body cover upper bolts.
  6. Remove the valve body cover (A) by loosening bolts.

    Tightening torque: 

    11.8 ~ 13.7 N.m (1.2 ~ 1.4 kgf.m, 8.7 ~ 10.1 lb-ft)

    Fig 4: Locating Valve Body Cover
    G11784349Courtesy of KIA MOTORS AMERICA, INC.
  7. Remove the solenoid valve harness (A) and oil temperature sensor (B) after removing the bolts.

    Tightening torque: 

    9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

    Fig 5: Removing Solenoid Valve Harness And Oil Temperature Sensor Bolts
    G11784350Courtesy of KIA MOTORS AMERICA, INC.
  8. Remove solenoid valve support bracket (A).

    Tightening torque: 

    9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

    Fig 6: Locating Solenoid Valve Support Bracket
    G11784351Courtesy of KIA MOTORS AMERICA, INC.
  9. Remove the underdrive brake control solenoid valve (B) after loosening a valve body mounting bolt (A).

    Tightening torque: 

    9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

    Fig 7: Removing Underdrive Brake Control Solenoid Valve Body Mounting Bolt
    G11784352Courtesy of KIA MOTORS AMERICA, INC.