Repair Procedures: Removal

[SULEV] 

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2. Disconnect the connector (A), and then remove the sensor (B).
   NOTE: Note that the SST (Part No.: 09392-1Y100 or 09392-2H100) is useful when removing the heated oxygen sensor.

   [Bank 1/Sensor 1] 

   Fig 1: Locate Connector (Bank 1/Sensor 1)

   Courtesy of KIA MOTORS AMERICA, INC.
   Fig 2: Locate Sensor (Bank 1/Sensor 1)

   Courtesy of KIA MOTORS AMERICA, INC.

   [Bank 1/Sensor 2] 

   Fig 3: Locate Connector (Bank 1/Sensor 2)

   Courtesy of KIA MOTORS AMERICA, INC.
   Fig 4: Locating Sensor (Bank 1/Sensor 2)

   Courtesy of KIA MOTORS AMERICA, INC.

[LEV2] 

[Bank 1/Sensor 1] 

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2. Disconnect the connector (A), and then remove the sensor (B).
   NOTE: Note that the SST (Part No.: 09392-1Y100 or 09392-2H100) is useful when removing the heated oxygen sensor.

Fig 5: Disconnect Connector (Bank 1/Sensor 1)

Courtesy of KIA MOTORS AMERICA, INC.

Fig 6: Remove Sensor (Bank 1/Sensor 1)

Courtesy of KIA MOTORS AMERICA, INC.

[Bank 1/Sensor 2] 

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2. Remove the console side cover (A).
   Fig 7: Locate Console Side Cover (Bank 1/Sensor 2)

   Courtesy of KIA MOTORS AMERICA, INC.
3. Disconnect the connector (A), and then remove the sensor (B).
   NOTE: Note that the SST (Part No.: 09392-1Y100 or 09392-2H100) is useful when removing the heated oxygen sensor.
   Fig 8: Disconnect Connector

   Courtesy of KIA MOTORS AMERICA, INC.
   Fig 9: Remove Heated Oxygen Sensor

   Courtesy of KIA MOTORS AMERICA, INC.