LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2016 >> Forte LX, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 1.8L >> Knock Sensor (KS) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the knock sensor connector (A).
    Fig 1: Disconnect Knock Sensor Connector
    G11793849Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the intake manifold (Refer to Intake Manifold Removal And Installation
  4. Remove the installation bolt (A), and then remove the sensor from the cylinder block.
Fig 2: Remove Sensor From Cylinder Block
G11793850Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals